The most weatherfast green pigment on the market. Chrome oxide green keeps colour for decades where organic greens fade in 2–5 years — with 982 °C heat stability and an NIR-reflective option for cool roofs.
The durability numbers for chrome oxide green are the best in the green pigment class: lightfastness 8/8 on the Blue Wool scale, weatherfastness 5/5, heat stability to 982 °C.
Top score on the Blue Wool scale. There is no chromophore to bleach: the colour is the Cr₂O₃ crystal itself, so UV has nothing to break.
In published exposure testing, a GREEN 1000 coating held Grade 8 with ΔE <1.0 after 24 months outdoors — no chalking, no gloss loss.
Zero colour drift through coil bake schedules (250–280 °C) and powder cure cycles (180–200 °C). Inert in the can and in the film.
Compare that against the organic greens. Phthalocyanine and arylamide types lose colour strength within 2–5 years of exterior service — the chromophore bond breaks under UV, the film chalks, and the specification dies with it. Chrome oxide green runs for decades on the same chemistry that makes it a refractory: an oxide that melts at 2435 °C does not notice a summer on a south-facing façade. It is also inert to acids, alkalis and solvents, non-migrating, non-bleeding, and unaffected by every cure schedule used in industrial coating. The full comparison is in chrome oxide green vs organic greens.
Two families cover the coating market: the GREEN 1000–1025 standard range for colour-critical systems, and NIR GREEN 1030 where reflectance matters.
| PROPERTY | VALUE | BASIS |
|---|---|---|
| Colour index | C.I. Pigment Green 17 | CAS 1308-38-9 · Cr₂O₃ |
| Lightfastness | 8/8 | Blue Wool scale |
| Weatherfastness | 5/5 | Exterior exposure |
| Heat stability | 982 °C | No colour shift |
| Hardness | 8.5–9 Mohs | Wear-resistant films |
| Melting point | 2435 °C | Inert at all cure schedules |
| Powder size | D50 1.0–2.0 μm · ≤0.5 μm micronized | Laser diffraction |
| Oil absorption | ≤25 g/100 g | ISO 787-5 |
| Hexavalent chromium | ≤10 ppm · ND (micronized) | ISO 4621 · per-lot CoA |
| GRADE | POSITIONING | TYPICAL USE | TDS |
|---|---|---|---|
| GREEN 1000–1025 | Standard pigment range | Solvent- and water-borne industrial paints, coil coatings, powder coatings, exterior façade systems, concrete colourants | |
| NIR GREEN 1030 | NIR-reflective | Cool roofing and building-envelope coatings: total solar reflectance 29.5 %, NIR reflectance 54.65 % |
GREEN 1000 starts from a yellow-green, vivid emerald tone and the series shades through the green space; lot-to-lot colour is held to ΔE ≤1.0 and tinting strength to 95–105 %. Full grade catalogue and LAB values on the pigment series page.
NIR GREEN 1030 turns a green coating into a thermal tool.
The reflectance gain is real, but tuned to your L-value: a deep architectural green reflects less than a light tint regardless of pigment choice. Specify NIR GREEN 1030 when the project has a solar-reflectance target, and request the reflectance data package to model your formulation before committing volume.
Two physical facts drive the dispersion recipe for chrome oxide green: the pigment is dense, and it is hard.
Specific gravity near 5.2: the pigment settles faster than organics of the same particle size. Stir before sampling, add anti-settling agents in low-viscosity systems, keep ring-main lines recirculating.
At 8.5–9 Mohs the pigment wears equipment, not the reverse. Use zirconia or hardened-steel grinding media, grind to Hegman 6–7, and stop there.
Pre-finished grades at D50 ≤0.5 μm exist for gloss systems. Start with the standard grade and move finer only if gloss demands it — over-grinding burns mill time and media long before it improves colour.
Because the pigment is chemically inert, there is no reactive chemistry to manage: no pH drift, no solubility in the binder, no stabilisers beyond what a dense pigment always needs. The formulation checklist lives in chrome oxide green dispersions, and coating-specific guidance in chrome oxide green in coatings.
Chrome oxide green costs more per kilo than organic green. It costs far less per year of colour.
An organic green exterior finish repaints every 2–5 years: access equipment, surface preparation, labour, downtime and disposal — two to four full cycles in ten years. A chrome oxide green film runs the decade on one application. Even at twice the per-kilo cost, one chrome oxide coat beats one organic coat plus two repaints — before access costs, which usually dominate the invoice.
The economics sharpen with the project: the longer the design life and the harder the access — high-rise façades, bridges, industrial plant, offshore structures — the wider the gap. Pigment is a small fraction of total applied cost, while repaint frequency is the multiplier. That is why architectural powder coaters, coil coaters and façade specifiers moved to Pigment Green 17 decades ago and stayed. See the full analysis in chrome oxide green vs organic greens and the field guide in chrome oxide green powder coatings.
If your requirement is structural rather than colour — refractory linings, kiln furniture — the same oxide is specified differently: see refractory grade chrome oxide green.