NANO CHROMEOXIDE GREEN

SPECIALTY GRADE — 100–500 NM

Chrome oxide green below the micron scale: higher surface area, deeper colour, new applications. GREEN 7710 is the catalogue answer wherever micron grades reach their limit.

Ultrafine chromium oxide green powder
Fig. 01 — Ultrafine Cr₂O₃ · Nano Series™ production line

ABOUTVERDECHROME

EST. 1994 · XI'AN, CHINA

The chrome oxide green specialist — manufacturing since 1994 in Xi'an, China. One pigment family, thirty-one years, delivered on spec.

COMPANYPROFILE

VerdeChrome is the chrome oxide green brand of Xi'an Delike Chemical Co., Ltd. — a Cr₂O₃ specialist manufacturing since 1994. Thirty-one years, one pigment family, one standard: on-spec delivery.

01

1994

Founded in Xi'an, China. Three decades of continuous chrome oxide green production — the chemistry, the kilns and the quality system have only deepened.

02

ISO 9001

Certified quality management. Every lot is released against a written CoA: purity, D50, Cr(VI), tint strength — signed and traceable to the batch record.

03

Two Brand Lines

DELIKECOLORS for pigment grades (paints, plastics, colourants) and DELIKEOXIDE for refractory and industrial grades — each with its own spec discipline.

04

Batch Traceability

Raw-material lot to finished pallet: every bag carries a batch number that resolves to a production record. Third-party testing available on request.

WHAT WECONTROL

PARAMETERCONTROLMETHOD
Purity Cr₂O₃98.0 – 99.6 %ISO 4621
Particle sizeD50 0.1 – 8 μmLaser diffraction
Hexavalent chromium≤ 5 / ≤ 10 / ≤ 200 ppmISO 4621 / ICP
Water-soluble salts≤ 0.70 %ISO 787
Colour (CIE Lab)ΔE ≤ 1.0 per lotSpectrophotometer

COMPLIANCEMAP

EU REACH registered. EU RoHS compliant. China GB 18666 conforming. Cr(VI) tiered disclosure on every CoA. SDS compiled to REACH Annex II with GHS pictograms.

QUESTIONS ANSWERED

Chrome oxide green (Cr2O3, Pigment Green 17) is used in coatings, plastics, concrete colouring, refractories, ceramics, glass, polishing compounds and, at electronic grade, in MLCC doping and sputtering targets.
Chrome oxide green is a stable Cr(III) pigment with no Cr(VI) when produced to modern standards. Our Low-Cr(VI) grades hold hexavalent chromium at or below 5 ppm, verified per ISO 2080 on every lot.
Pigment grades are optimised for colour and dispersion (D50 0.7-10 μm); refractory grades are sintered, shaped by forming method (D50 0.1-8 μm windows) and come in standard and Low-Cr(VI) tiers.
The NIR Colors™ grades GREEN 1030 and 1031 reflect 51-55 % of near-infrared radiation (780-2500 nm) on an acrylic system, measured with a PerkinElmer LAMBDA 1050+.
No. We do not supply aluminium powder and never pre-mix chromium oxide with it - the mixture is a regulated thermite composition and is produced only by qualified smelters at the furnace.
D50 ranges from 0.1 μm (electronic and sub-micron refractory grades) through 1-8 μm pigment and refractory grades to coarse granular material for grinding and polishing.