
Low Cr(VI) Chrome Oxide Green
The number that matters on a chrome oxide green certificate is not the purity — it is the residual hexavalent chromium. VerdeChrome ships Cr₂O₃ in three Cr(VI) tiers; the ≤5 ppm low-Cr(VI) tier is the one compliance-driven buyers specify.
What "Low Cr(VI)" Means
Chrome oxide green is chromium(III) oxide — Cr₂O₃, CAS 1308-38-9 — in which chromium sits in the stable, trivalent state. Hexavalent chromium, Cr(VI), is a different species: the form regulators restrict, the form exposure limits address, and the form a production route can leave behind. When Cr₂O₃ is manufactured via the sodium dichromate route, small Cr(VI) residues can survive calcination; the manufacturer's job is to reduce and wash them to a controlled ceiling, and prove it lot by lot.
"Low Cr(VI)" is that ceiling set low: at most 5 ppm of hexavalent chromium, verified on every batch. The tier sits below the standard pigment tier (≤10 ppm) and well below the regular industrial tier (≤200 ppm) — but it is not a midpoint, it is a process claim. Reaching ≤5 ppm demands more reduction, longer washing, tighter water treatment and more QC, and it is priced and specified as its own tier.
A verified ≤5 ppm ceiling moves the compliance burden upstream. Your downstream declarations, workplace monitoring and licence renewals rest on a number we have already measured and signed.
How Cr(VI) Is Detected
A tier claim is only as good as the measurement behind it. VerdeChrome verifies hexavalent chromium with two complementary methods, and the result appears on every certificate of analysis.
| Method | What it measures | Where it applies |
|---|---|---|
| ISO 4621 | Chemical determination of hexavalent chromium content | Per-lot CoA value for every tier — the number you audit |
| ICP-MS | Trace-level chromium with Cr(VI) confirmation | Sub-ppm confirmation and the non-detect (ND) verification of micronized grades |
Every CoA states the tier value — ≤5, ≤10 or ≤200 ppm, or ND for micronized grades — signed and traceable to the batch record.
Three Tiers, Three Missions
The Cr(VI) tier exists because different applications carry different obligations: a pigment in a coating answers to product regulation, an oxide in a refractory lining answers to workplace exposure limits on top. One ceiling cannot serve both, so the portfolio is tiered.
| Tier | Cr(VI) ceiling | Grade family | Where it belongs |
|---|---|---|---|
| Low Cr(VI) | ≤5 ppm | DELIKEOXIDE refractory grades G-5891, G-5899, G-5996, G-5070, G-5073 | Refractory brick, monolithics and high-temperature linings where exposure limits and licences are tightest |
| Standard (pigment) | ≤10 ppm | DELIKECOLORS pigment grades | Paints, coatings, plastics and construction colouring |
| Regular | ≤200 ppm | G-5001, G-5002, G-5003, G-5006 | General industrial and metallurgical uses |
| Micronized | ND | Micronized grades | Electronics and specialty applications |
The lower the ceiling, the more reduction, washing and verification the lot has passed — and the more of the buyer's compliance risk the supplier absorbs.
Where Regulation Is Headed
The direction of travel is unambiguous. EU REACH Annex XVII caps Cr(VI) in cement and in leather articles; occupational exposure limits for hexavalent chromium compounds keep falling; and downstream declarations — REACH Article 33 communications, California Proposition 65 — push responsibility up the supply chain. A buyer who cannot document an input's Cr(VI) content inherits the documentation problem downstream, where the question is no longer optional.
Low-Cr(VI) chrome oxide green ends that problem at the source: the ceiling is verified before the material reaches your plant, so downstream declarations become statements of fact instead of open questions. Read the full brief in Cr(VI) Regulations Are Tightening: What Refractory Buyers Must Know.
The Low-Cr(VI) Portfolio
The ≤5 ppm tier is delivered by five DELIKEOXIDE refractory grades — G-5891, G-5899, G-5996, G-5070 and G-5073 — engineered for brick, monolithics and kiln furniture. Each keeps its D50 window, purity and tint strength, and adds the ≤5 ppm ceiling. Production lots ship in 25 kg bags or jumbo bags, traceable from raw-material lot to finished pallet.
See the full grade table, D50 windows and forming-method guidance on the DELIKEOXIDE refractory series page.
Why There Is No True Replacement
Buyers under Cr(VI) pressure sometimes ask for a chromium-free green instead. The honest engineering answer: no alternative exists with the same colour, thermal stability and chemical durability. Organic greens degrade or burn out exactly where Cr₂O₃ is specified — kiln temperatures, decades of UV, aggressive media. Mixed-oxide inorganic greens shift hue, cost more, and still fail durability.
The correct response is not substitution — it is tier control: keep the only green that survives the process and drive its Cr(VI) to a verified ceiling. Colour and durability data are on the DELIKECOLORS pigment series page.
Specify Cr(VI) as a ceiling, not as "controlled". A CoA that prints the tier — ≤5, ≤10, ≤200 ppm or ND — is a compliance instrument; a CoA that prints only "pass" is an opinion. In compliance-critical applications the ≤5 ppm tier is usually the cheapest line on the fully-loaded cost sheet.
CONTINUE READING
FAQ — Low Cr(VI) Questions
Questions in engineering language welcome: sales@chromeoxidegreen.com. Trial samples ship from 1 kg; production lots in 25 kg bags or jumbo bags.