
Chrome Oxide Green Price
Chrome oxide green is priced by specification, not by list. Two buyers asking for "chrome oxide green" can receive quotes that differ by a factor of two — and both can be correct — because grade, particle size, Cr(VI) tier, volume and destination each move the number. This page explains what actually sets the price, and the six lines we need to quote yours.
Five Cost Drivers, One Floor
Every chrome oxide green quote rests on five cost layers. Four of them move with world markets; one moves with your specification. Understanding which is which is the difference between negotiating and guessing.
- Chromite ore. The feedstock chain — chromite from South African and Kazakh mines into sodium dichromate — is the largest single layer, and it moves with global ore and ferrochrome indices, not with pigment demand.
- Energy for calcination. Converting the chromium chemical into oxide means firing at temperatures where energy is the biggest variable cost in the plant. Coal, gas and electricity prices flow through to the pigment within a quarter.
- Cr(VI) control processing. Reduction, washing, water treatment and per-lot QC push residual hexavalent chromium to the tier ceiling. This layer never shrinks — regulation only ever raises the floor.
- Particle engineering. Milling and classification to a D50 window consume energy and yield fines. The price ladder between grades is mostly a grinding ladder.
- Logistics. A heavy, low-value-per-kilo pigment is freight-sensitive. Container rates can add or subtract more landed cost than any mill-side efficiency.
The full cost-stack analysis, layer by layer, is in What Actually Drives Chrome Oxide Green Prices.
Why We Publish Structure, Not Numbers
A published price list is wrong for someone the day after it is posted. Ore indices, energy tariffs and freight rates move constantly, and a fixed number would either overcharge one buyer or mislead the next. Instead, VerdeChrome quotes per specification, with a stated validity, so the number you receive is the number that applies to your grade, your tier, your volume and your port.
The honest answer to "what is the price?" is therefore always a second question: which grade, which D50, which Cr(VI) ceiling, which volume, where? That is not evasion — it is the only way a quote can be accurate. The parameters below are the same ones our quotations are built from.
What Sets Your Number
Six parameters decide the quote. Five of them are chosen by the buyer — which is why the buyer, not the market, holds most of the pricing lever.
| Parameter | What to specify | Why it moves the price |
|---|---|---|
| Grade family | Pigment (DELIKECOLORS) or refractory (DELIKEOXIDE) | Process route and raw-material position |
| D50 | A window within the 0.1–8 μm range | Milling, classification energy and fines yield |
| Cr(VI) tier | ≤5 / ≤10 / ≤200 ppm / ND | Reduction, washing, water treatment and QC load |
| Volume | Tonnes per year and call-off pattern | Batch economics and container loading |
| Destination | Port and country | Freight and compliance documentation |
| Packaging | 25 kg bags or jumbo bags | Handling and loading cost |
Where Grade Choice Moves the Price
The price ladder between grades is mostly a grinding ladder. Standard pigment grades are milled and sieved; micronized grades add energy-intensive classification and carry a non-detect (ND) Cr(VI) verification — both of which are real process steps, not list-position adjustments. Choose a D50 window matched to your process and you stop paying for fineness your mill does not need.
The second structural premium is the Cr(VI) tier. Driving residual hexavalent chromium from the ≤200 ppm regular tier down to the ≤5 ppm low-Cr(VI) tier adds reduction, washing and per-lot QC — a structural cost, not a markup, and one that transfers compliance risk off your balance sheet. Pigment grade data is on the DELIKECOLORS series page; refractory grades, including the low-Cr(VI) tier, are on the DELIKEOXIDE series page.
The two layers worth your negotiating energy are particle engineering and the Cr(VI) ceiling — not the feedstock. Every supplier pays the same ore index; what differs is what happens between the kiln and the bag. A buyer who specifies D50 as a window and Cr(VI) as a ceiling, instead of a single point and "controlled", saves more than any haggling over the commodity line — and gets a quote that can actually be held to spec.
The Inquiry Checklist — Six Lines
Send these six lines and we return a structured quote covering grade, tier, packaging and terms — no call-back tennis.
- 1. Grade — pigment or refractory series, target model if known.
- 2. D50 — a single point or a window within the 0.1–8 μm range.
- 3. Cr(VI) ceiling — ≤5, ≤10 or ≤200 ppm, or ND for micronized grades.
- 4. Volume — tonnes per year and how you want them called off.
- 5. Destination — port and country, for freight and documentation.
- 6. Application — what the oxide must survive: temperature, medium, colour target.
Write to sales@chromeoxidegreen.com. Trial samples ship from 1 kg; production lots in 25 kg bags or jumbo bags. For committed volumes we also structure index-linked quarterly pricing and fixed-price annual agreements.