CHROME OXIDE GREENSUPPLIER

CR₂O₃ · CAS 1308-38-9 · EST. 1994

Direct from the production line in Xi'an: pigment, refractory and electronic chrome oxide green in 25 kg bags or jumbo bags — with Cr(VI) disclosed on every certificate of analysis.

Chrome oxide green pigment powder
Fig. 01 — Cr₂O₃ pigment · DELIKECOLORS production line

SUPPLYCAPABILITY

VerdeChrome is the chrome oxide green brand of Xi'an Delike Chemical Co., Ltd. — a Cr₂O₃ specialist manufacturing since 1994. As a supplier we carry one responsibility: the grade you order is the grade that lands, documented and traceable.

01

Two Brand Lines

DELIKECOLORS covers pigment grades for coatings, plastics and colourants; DELIKEOXIDE covers refractory and industrial grades. Each line has its own spec discipline — see pigment series and refractory series.

02

24 Catalogue Grades

D50 from 0.1 to 8 μm across Standard, MicroPowder, NIR and Nano pigment grades, refractory grades and the EG-99/EG-99H electronic grades. One supplier, the full Cr₂O₃ range.

03

Tiered Cr(VI) Disclosure

Three documented Cr(VI) tiers — ≤5, ≤10 and ≤200 ppm — stated on every CoA. You select the tier your application requires; we hold the line on it.

04

Samples & Documents

Evaluation samples from 50 g. TDS, SDS and lot CoA within 24 hours of request. Full series documentation via contact or the downloads below.

Direct supply — no intermediaries

Every bag ships from our Xi'an plant with a batch number that resolves to the production record, release tests and retention sample. You buy from the manufacturer that made the pigment — read our manufacturing profile.

CR(VI) THREETIERS

Hexavalent chromium is the parameter that decides regulatory acceptance. We supply chrome oxide green in three documented tiers, verified per lot per ISO 2080 and printed on the CoA.

TIERMAX Cr(VI)GRADESTYPICAL USE
Tier 1 — Low-Cr(VI) / micro≤ 5 ppm / NDG-5891, G-5899, G-5996, G-5070, G-5073 · MicroPowder GREEN 1025–1073 (non-detect)High-spec coatings, colourants and applications under the strictest Cr(VI) requirements
Tier 2 — Pigment standard≤ 10 ppmGREEN 1000, GREEN 1001, GREEN 1002, GREEN 1020Paints, plastics, construction colouring
Tier 3 — Refractory standard≤ 200 ppmG-5001, G-5002, G-5003, G-5006Refractories, ceramics, glass colouring

SPECIFICATIONTABLE

The master specification across the catalogue. Grade-level values are fixed in each TDS; the table below is the envelope every lot is released against.

PARAMETERVALUEMETHOD
Purity Cr₂O₃98.0 – 99.6 %ISO 4621
Particle sizeD50 0.1 – 8 μmLaser diffraction
Hexavalent chromium≤ 5 / ≤ 10 / ≤ 200 ppmISO 2080 / ICP
Water-soluble salts≤ 0.70 %ISO 787
Colour consistencyΔE ≤ 1.0 per lotSpectrophotometer
Lightfastness8 / 8Blue wool scale
Weatherability5 / 5Outdoor exposure rating
Heat stability982 °CHDPE extrusion test
Melting point2435 °C—
Mohs hardness8.5 – 9—

PACKAGING& LOGISTICS

Packing is part of the specification. Contamination at the bag level has the same effect as contamination at the kiln — so both are controlled the same way.

ITEMSTANDARDREMARKS
25 kg bagPaper-plastic composite, PE linerStandard unit for trial and production lots; palletized and shrink-wrapped
Jumbo bagBulk FIBCFor container and silo-fed orders; on request
Minimum order1 × 25 kg bagEvaluation samples ship from 50 g
Lead timeConfirmed at quotationStocked pigment grades ship sooner; micronized and Low-Cr(VI) grades are produced to order
DocumentsTDS · SDS · CoAIssued per lot; sent with the shipment

TDS / SDSDOWNLOADS

Representative documents from each line. The full library follows the catalogue on the pigment, refractory and electronic series pages — or email sales@chromeoxidegreen.com for the complete set.

ENQUIRYFORM

Tell us the grade, the volume and the Cr(VI) tier — we return the quotation with lead time and the matching TDS/CoA.

SUPPLIERFAQ

Evaluation samples ship in 50 g quantities. Production lots start from one 25 kg paper-plastic composite bag; jumbo-bag packing is available for container orders. Volume pricing steps down as the order grows.
Standard packing is 25 kg paper-plastic composite bags with PE liner, palletized and shrink-wrapped. Jumbo bags (FIBC) are supplied on request for bulk and container shipments.
Three tiers: ≤5 ppm for Low-Cr(VI) refractory grades (MicroPowder pigment grades test non-detect), ≤10 ppm for pigment grades, ≤200 ppm for standard refractory grades. The measured value is stated on every CoA.
Use the download buttons above, or email sales@chromeoxidegreen.com. TDS, SDS and lot CoA are sent within 24 hours; full series documentation ships with the first order.
Lead time is confirmed with your quotation. Stocked pigment grades ship sooner; micronized and Low-Cr(VI) grades are produced to order against an agreed batch schedule. Quotations are returned within 24 hours.